Aeromotive 17130 - 86-98.5 A1000 5.0L MUSTANG STEALTH FUEL SY Bedienungsanleitung PDF herunterladen

AEROMOTIVE

Part # 17130

86-95 Mustang 5.0L Fuel System Kit

INSTALLATION INSTRUCTIONS

CAUTION:

Installation of this product requires detailed knowledge of automotive systems and

repair procedures. We recommend that this installation be carried out by a qualified

automotive technician.

Installation of this product requires handling of gasoline. Ensure you are working in a

well ventilated area with an approved fire extinguisher nearby. Extinguish all open flames,

prohibit smoking and eliminate all sources of ignition in the area of the vehicle before

proceeding with the installation.

When installing this product, wear eye goggles and other safety apparel as needed to

protect yourself from debris and sprayed gasoline

WARNING!

The fuel system is under pressure. Do not open the fuel system until the pressure has

been relieved. Refer to the appropriate vehicle service manual for the procedure and

precautions for relieving the fuel system pressure

Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.

This kit contains the following parts:

1 ea P/N 18690 Cobra-Top Stealth Fuel Tank

1 ea P/N 16301 fuel pump wiring kit

1 ea 3ft length of 10-ga. Black wire

1 ea 25ft length of 10-ga. Red wire

1 ea 30-amp circuit breaker

1 ea 30-amp automotive relay

2 ea blue female blade connector

2 ea yellow female blade connector

5 ea yellow #10 stud ring connector

1 ea yellow 3/8” stud ring connector

6 ea tie-wraps

26 ft AN-06 stainless steel braided line

16 ft AN-08 stainless steel braided line

6 ea P/N 15650 AN-06 straight hose-end

1 ea P/N 15651 AN-06 45-degree hose-end

5 ea P/N 15652 AN-06 90-degree hose-end

2 ea P/N 15653 AN-08 straight hose-end

2 ea P/N 15655 AN-08 90-degree hose-end

1 ea P/N 12301 Filter 10-Micron Paper

1 ea P/N 13109 A1000-06 Fuel Pressure Regulator

1 ea P/N 14101 Ford 5.0L Billet Fuel Rails

1 ea P/N 15673 AN-08 to 2-AN-06 Y-block

2 ea ¼” flat washers

2 ea ¼-20 nyloc nuts

2 ea ¼-20 x 1” carriage bolts

12 ea tie-wraps

3 ea AN-06 o-ring

6 ea AN-08 o-ring

2 ea AN-10 o-ring

1 ea P/N 15602 AN-06 male/male flare union

5 ea P/N 15605 ORB-08 to AN-06 male flare

3 ea P/N 15606 ORB-06 to AN-06 male flare

1 ea P/N 15607 ORB-08 to AN-08 male flare

2 ea P/N 15610 ORB-10 to AN-08 male flare

12 ea cushioned clamps

12 ea self drilling screws

1 ea P/N 12305 2” billet filter bracket

1 ea P/N 15633 0-100psi fuel pressure gauge

1 2 3 4 5 6 ... 13 14

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

AEROMOTIVE Part # 17130 86-95 Mustang 5.0L Fuel System Kit INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed

Seite 2

3-8. In the vehicle’s engine compartment, find a suitable location near the fuel rails for the supplied Y-Block. 3-9. Starting from the fuel rails

Seite 3

Section 4 - Fuel Line Hose End Installation: CAUTION: When assembling this product, wear eye goggles and other safety apparel as needed to protect

Seite 4

4-7. Using a properly sized wrench, complete threading the two components together (The maximum allowable gap between the two fitting components is .

Seite 5

Section 5 – Final Checks and System Start-up 5-1. Ensure that any spilled gasoline and any gasoline soaked shop towels are cleaned up and removed fr

Seite 6

Aeromotive, Inc. 7805 Barton Street, Lenexa, KS 66214 Phone: (913) 647-7300 Fax: (913) 647-7207 AEROMOTIVE, INC. LIMITED WARRANTY This Aeromotive

Seite 7

The following steps are typical of most installations: Section 1 - Fuel Tank Installation / Electrical wiring Section 2 – Fuel Rail Installation S

Seite 8

Section 1 - Fuel Tank Installation: 1-1. Once the engine has been allowed to cool, disconnect the negative battery cable and relieve the fuel system

Seite 9

1-7. Before placing the fuel level sender assembly in the tank, attach the two level sending unit wires on the Stealth pump to the fuel level sender

Seite 10

1-9. Now the fuel tank is ready for your Aeromotive fuel pump assembly. Place one 15607 fitting with o-ring into the outlet port and one 15605 fitt

Seite 11 - CAUTION:

1-17. Locate the 10-gauge red wire connected to the pump in step 1-11 and route it to the new fuel pump relay in a manner that protects it from exi

Seite 12

Section 2 – Fuel Rail Installation Note: Please note, due to the wide range of applications and varying OEM and after market component tolerances i

Seite 13

2-19. Remove the old o-rings from the fuel injectors, inspect the injectors for any dirt or debris and clean if needed. 2-20. Coat the new fuel

Seite 14

Section 3 – Fuel Regulator Installation and Fuel Line Plumbing 3-1. In the vehicle’s engine compartment, mount the supplied fuel pressure regulator

Kommentare zu diesen Handbüchern

Keine Kommentare

Aeromotive 17130 - 86-98.5 A1000 5.0L MUSTANG STEALTH FUEL SY Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Aeromotive 17130 - 86-98.5 A1000 5.0L MUSTANG STEALTH FUEL SY herunter. Aeromotive 17130 - 86-98.5 A1000 5.0L MUSTANG STEALTH FUEL SYSTEM User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Aeromotive 17130 - 86-98.5 A1000 5.0L MUSTANG STEALTH FUEL SY