Aeromotive 13210 - PRO-STOCK, 2-PORT REGULATOR Bedienungsanleitung PDF herunterladen

AEROMOTIVE

Part # 13210

INSTALLATION INSTRUCTIONS

CAUTION:

Installation of this product requires detailed knowledge of automotive systems and

repair procedures. We recommend that this installation be carried out by a qualified automotive

technician.

Installation of this product requires handling of gasoline. Ensure you are working in a

well ventilated area with an approved fire extinguisher nearby. Extinguish all open flames,

prohibit smoking and eliminate all sources of ignition in the area of the vehicle before

proceeding with the installation.

When installing this product, wear eye goggles and other safety apparel as needed to

protect yourself from debris and sprayed gasoline.

WARNING!

The fuel system may be under pressure. Do not open the fuel system until any pressure

has been relieved. Refer to the appropriate vehicle service manual for the procedure and

precautions for relieving the fuel system pressure.

The enclosed Aeromotive regulator utilizes a o-ring sealed AN-12 style inlet port and two o-ring

sealed AN-8 style outlet ports; these regulator ports are NOT PIPE THREAD

and utilize NO

THREAD SEALANT.

Performance Specifications: Model 13210

Outlet Fuel Pressure, adjustable 4 - 8 psi

Inlet port Size 1x AN-12

Outlet Port Size 2x AN-08

Aeromotive system components are not legal for sale or use on emission controlled motor vehicles.

The following steps are typical of most installations:

1. Once the engine has been allowed to cool, disconnect the negative battery cable and relieve the

fuel system pressure.

2. Place shop towels around the regulator to catch any gasoline that is spilled during this step of the

installation. Remove any regulator mounting hardware and connecting fuel lines, carefully remove

the regulator.

3. Find a suitable place in the vehicle’s engine compartment to mount the Aeromotive regulator. Using

the supplied mounting bracket as a template, mark the bracket mounting holes and drill to accept a

#10 screw.

4. With the bracket attached to the regulator, mount the bracket and regulator to the vehicle using two

#10 screws, nuts and lock washers.

1 2 3

Inhaltsverzeichnis

Seite 1 - INSTALLATION INSTRUCTIONS

AEROMOTIVE Part # 13210 INSTALLATION INSTRUCTIONS CAUTION: Installation of this product requires detailed knowledge of automotive systems and repair

Seite 2 - AEROMOTIVE, INC

5. Attach the fuel supply line to the bottom port of the regulator using the supplied AN-10 style fitting and o-rings. If your existing supply line

Seite 3

Aeromotive, Inc. 7805 Barton Street, Lenexa, KS 66214 Phone: (913) 647-7300 Fax: (913) 647-7207 AEROMOTIVE, INC. LIMITED WARRANTY This Aeromotive

Kommentare zu diesen Handbüchern

Keine Kommentare

Aeromotive 13210 - PRO-STOCK, 2-PORT REGULATOR Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Für das Auto Aeromotive 13210 - PRO-STOCK, 2-PORT REGULATOR herunter. Aeromotive 13210 - PRO-STOCK, 2-PORT REGULATOR User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Für das Auto Aeromotive 13210 - PRO-STOCK, 2-PORT REGULATOR